Worker using a tablet near garbage trucks, managing waste collection operations with modern technology in an urban environment, wearing reflective safety gear

Whenever your shipment is on the move, our advanced monitoring devices provide real-time visibility for the complete journey

Here is a quick guide on how to properly monitor, charge, and care for these devices.

Monitoring your device location

The monitoring device is outside the engine bag and uncovered.

BR710 and BR725

The monitoring device is located inside the engine bag, near the front of the engine by the stand column.

Loading Video

Below the engine bag from a PEARL700 and TAY yyou will find the monitoring device

PEARL700

The monitoring device is outside the engine bag and uncovered.

TAY

The monitoring device is outside the engine bag and uncovered.

Loading Video

How to charge the battery

Follow these steps to charge your Kuehne+Nagel Roambee. Please keep in mind:

  • A full charge requires 24 hours.

  • There is no extra battery life indicator on the device.

  • For battery status, contact Alexander Arias, Regional System Key User, at +1 463-291-3568 or knsgi.ma@kuehne-nagel.com.

Step 1: Locate and remove the device

  • Carefully remove the device for charging.

  • Break the seal, and retrieve the Roambee monitoring device.

Step 2: Charge the device

  • Move the device to a designated charging station.

  • Remove the waterproof seal, and connect a USB Type-C charger to the respective port to begin charging.

  • On the front of the device, the red light above the battery symbol means it’s charging.

Roambee device showing the step 2 of how to charge the device with a modem base
Image of the roambee showing on the engine. showing the exact location to make sure that you can reseal and reinstall it.

Step 3: Reinstall and seal the device

  • Press the status button once charging is complete to reawaken the tracker.

  • Once it’s charged, return the device to its original location and reseal it properly.

  • If an extra seal is in the pouch, use it to reseal the device. If unavailable, please contact Alexander Arias (see contact information under “How to charge the battery” section).

  • Once the device is properly resealed and reconnected to the stand, seal the engine bag again.

Important notes

Follow these tips to maintain top device performance.

  • To prevent damage, always handle the monitoring device with care. 

  • Follow facility safety guidelines when handling charging equipment. 

  • Apply all seals properly to maintain the integrity of the monitoring process. 

Picture of yellow roambee devide with black background